KNX/IP Gateway

KNX/IP Gateway:

  • Power Supply: 21~30V DC, via the EIB bus
  • Current consumption <12mA
  • Auxiliary power: 20~30V DC
  • Connections: Bus connection terminal (black/red)
  • Auxiliry connection terminal (grey/yellow)
  • LAN: RJ45 socket for 10/100Base-T
  • Green LED flashing: The device running indicator
  • LAN/LINK LED ON: Network connection indicator
  • LAN/LINK LED flashing: Network telegram traffic indicator
  • EIB/LINK LED ON: Bus connection indicator
  • EIB/LINK LED flashing: Bus telegram traffic indicator

 

  • KNX interface between KNX installations and IP networks
  • Configure, parameterize and commission the KNX installation
    and bus monitor via the LAN using the ETS software
    (ETS3 or later)
  • The IP address of the device can be fixed or can be received
    from a DHCP server
  • Support the UDP telegram, and the port number 3671
  • The factory default physical addresses are 15.15.255, and
    the address can be modified directly via local interface settings
    of ETS
  • Power Supply: 21~30V DC, via the EIB bus
  • Current consumption <12mA
  • Auxiliary power: 20~30V DC
  • Connections: Bus connection terminal (black/red)
  • Auxiliry connection terminal (grey/yellow)
  • LAN: RJ45 socket for 10/100Base-T
  • Green LED flashing: The device running indicator
  • LAN/LINK LED ON: Network connection indicator
  • LAN/LINK LED flashing: Network telegram traffic indicator
  • EIB/LINK LED ON: Bus connection indicator
  • EIB/LINK LED flashing: Bus telegram traffic indicator
Datasheet is available in PDF format. You can download it here.

Placeholder