KNX Switch Actuator


Cat. no.: UP02112
CHARACTERISTICS
● Manual operation available
● Time functions, on/off delay
● Scene control / presets via 8bit/1bit commands
● Logic operation AND, OR, XOR, gate function
● Status response
● Forced operation and safety function
● Reaction to threshold functions
● Control of electro thermal valve drives
● Selection of preferred state after bus voltage failure and recovery
● Inversion of the outputs
● Staircase lighting functions with warning and adaptable staircase lighting time.

  • Manual operation, Time functions, on/off delay
  • Scene control / presets via 8bit/1bit commands
  • Logic operation AND, OR, XOR, gate function
  • Status response
  • Forced operation and safety function
  • Reaction to threshold functions
  • Control of electro thermal valve drives
  • Selection of preferred state after bus voltage failure and
    recovery
  • Inversion of the outputs
  • Staircase lighting functions with warning and adaptable
  • Power Supply: 21~30V DC, via the EIB bus
  • Current consumption <12mA
  • Number of contacts 12
  • Un rated voltage 250/440V AC (50/60 HZ)
  • In rated current 16A
  • Connections: Bus connection terminal (black/red)
  • Load circuits Screw terminals
  • Temperature Operation -5°C ~45°C
  • Storage -25°C ~55°C
  • Transport -25°C ~70°C
  • Mounting On 35mm mounting rail
Datasheet is available in PDF format. You can download it here.
Placeholder